Loading ...
Loading ...
Loading ...
Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions
Temperature Limiter
Every radiant surface unit has a
temperature limiter.
The temperature limiter protects the
glass cooktop from getting too hot.
The temperature limiter may cycle the
units off for a time if:
■ The pan boils dry.
■ The pan bottom is not flat.
■ The pan is off center.
■ There is no pan on the unit.
Dual Surface Unit Control Knob
The dual surface unit has 2 cooking sizes to select
from so you can match the size of the unit to the
size of the cookware you are using.
To use the small surface unit, turn the
control knob to the SMALL BURNER
settings.
To use the large surface unit, turn the
control knob to the LARGE BURNER
settings.
9"
6"
Using the surface units.
Throughout this manual, features and appearance may vary from your model.
How to Set
Push the knob in and turn in either
direction to the setting you want.
At both OFF and HI the control clicks
into position. You may hear slight clicking
sounds during cooking, indicating the
control is keeping the power level you set.
A HOT COOKTOP indicator light will glow
when any radiant element is turned on,
and will remain on until the surface is
cooled to approximately 150°F.
Indicator light will:
■ come on when the unit is turned on or hot
to the touch.
■ stay on even after the unit is turned off.
■ glow until the unit is cooled to approximately
150°F.
Be sure you turn the control knob to
OFF when you finish cooking.
Using the Bridge Burner
To use the bridge burner, turn the
control knob to the BRIDGE BURNER
settings.
For full bridge burner operation, turn
on the rear burner.
To use only the front burner, turn the
control knob to the FRONT BURNER
settings.
8
Triple Surface Unit Control Knob (on some models)
The triple surface unit has 3 cooking sizes to
select from so you can match the size of the unit
to the size of the cookware you are using.
To use the small surface unit, turn the
control knob counterclockwise to the
small burner settings.
To use the medium surface unit, turn the
control knob clockwise (past the large
burner) or counterclockwise (past the small
burner) to the medium burner settings.
To use the large surface unit, turn the
control knob clockwise to the large
burner settings.
Loading ...
Loading ...
Loading ...