Loading ...
Loading ...
Loading ...
Preparing the Camcorder
22
Menus
Table of Contents Index
4 Hook the viewfinder unit latch under the left side of the
LCD panel and then fasten the latch. Then, return the
LCD panel to its original position.
Adjusting the Viewfinder Unit
1 Press the ON/OFF button to turn on the camcorder.
• The POWER/CHG indicator will illuminate.
• If necessary, perform the initial setup (A 27).
2 Adjust the dioptric adjustment lever until the viewfinder unit’s
image is sharp.
Removing the Viewfinder Unit
1 Turn the LCD panel 90 degrees upward.
2 Open the viewfinder unit latch and remove the viewfinder unit
from the camcorder.
• Make sure to open the latch all the way before removing
the unit.
3 Attach the viewfinder unit cover, hook the viewfinder unit
latch to the left side of the cover and then fasten the latch.
햲
햳
햴
Dioptric
adjustment lever
햵
햲
햳
햴
햶
Loading ...
Loading ...
Loading ...