Loading ...
Loading ...
Loading ...
Opening and closing
Note
●
Never leave any valuable items in the vehi-
cle unattended. Even a locked vehicle is not a
safe.
●
If the diode on the driver door sill lights up
for about 30 seconds when the vehicle is
locked, the central locking system or anti-
theft alarm* is not working properly. You
should have the fault repaired at a SEAT Offi-
cial Service or specialised workshop.
●
The vehicle interior monitoring of the anti-
theft alarm* system will only function as in-
tended if the windows and the sunroof* are
closed.
Car key
Fig. 91 Vehicle key
Fig. 92 Vehicle key with alarm button
Vehicle key
With the vehicle key the vehicle may be
locked or unlocked remotely ››› page 82.
The vehicle key includes an emitter and bat-
tery. The receiver is in the interior of the vehi-
cle. The range of the vehicle key with remote
control and new battery is several metres
around the vehicle.
If it is not possible to open or close the vehi-
cle using the remote control key, this should
be re-synchronised ››› page 87 or the bat-
tery changed ››› page 86
.
Diff
er
ent keys belonging to the vehicle may
be used.
Control lamp on the vehicle key
When a button on the vehicle key is pressed,
the control lamp flashes ››› Fig. 91 (arrow)
once briefly, but if the button is held down for
a longer period the control lamp flashes sev-
eral times, such as in convenience opening.
If the vehicle key control lamp does not light
up when the button is pressed, replace the
key's battery ››› page 86.
Unfolding and folding the key shaft
Press button
1
››› Fig. 91
or ›
›› Fig. 92
to un-
lock and unfold the key shaft.
To fold the shaft away, press button
1
and
fold the key shaft in until it locks in place.
Alarm button*
Only press alarm button
2
in the event of an
emergency! When the alarm button is press-
ed, the vehicle horn is heard and the turn sig-
nals are switched on for a short time. When
the alarm button is pressed again, the alarm
is switched off.
Replacing a key
To obtain a spare key and other vehicle keys,
the vehicle chassis number is required.
Each new key contains a microchip which
must be coded with the data from the vehicle
electronic immobiliser. A vehicle key will not
work if it does not contain a microchip or the
microchip has not been encoded. This is also
true for keys which are specially cut for the
vehicle.
»
83
Technical specifications
AdviceOperationSafetyThe essentials
Loading ...
Loading ...
Loading ...