Loading ...
Loading ...
Loading ...
The essentials
Wire hook for pulling off the wheel cov-
ers*/wheel bolt cap clip.
●
Take out the spare wheel and the tools that
are located under the floor panel in the lug-
gage compartment.
●
Take out the wheel cover or the bolt caps.
●
Loosen the bolts with the box spanner (1
turn to the left).
●
Mount the jack on the support points de-
signed for this purpose on the strut
››› Fig. 52
.
●
R
ai
se the vehicle, turning the jack until it is
slightly lifted off the ground.
●
Unscrew the bolts completely and remove
the punctured wheel.
●
Put the spare wheel in place. Screw on the
bolts and tighten them loosely with the box
spanner.
●
Lower the vehicle with the jack. Finish tight-
ening the bolts with the box spanner.
››› in What to do first on page 217
››› page 217
6
Emergency towing of the
vehicle
Towing
Fig. 53
Fig. 54
The towline anchorages are located under
the floor panel in the luggage compartment.
Switch on the ignition so that the turn sig-
nals, windscreen wipers and windscreen
washer can work. Ensure that the steering
wheel is unlocked and moves freely.
Place the gear lever in neutral on vehicles
with a manual gearbox. With an automatic
gearbox, place the lever in N.
To brake, press the brake pedal firmly. The
brake servo does not work when the engine
is switched off.
The power steering only works when the igni-
tion is switched on and the vehicle is moving,
provided that the battery is sufficiently charg-
ed. Otherwise, it will need more force.
Ensure that the tow rope remains taut at all
times.
Tow rope or tow bar
The tow bar offers increased safety and a
lower risk of damage.
The tow rope is recommended when there is
no tow bar. It must be elastic so that it does
not damage the vehicle.
Towline anchorages
Attach the bar or rope to the towline ancho-
rages.
It is located with the vehicle's tools
›››
page 220
.
»
35
Technical specifications
AdviceOperationSafetyThe essentials
Loading ...
Loading ...
Loading ...