Loading ...
Loading ...
Loading ...
Transport and practical equipment
Hook the net bag next to the load threshold
●
Secure the short net hooks to the fastening
rings ››› Fig. 135
1
››› . The bag zip should
be facing upwards.
●
Secure the straps in the bag hooks
2
.
Removing the net bag
The hooked up net bag is taut ››› .
●
Remove the hooks and the net bag straps
from the fastening rings and from the bag
hooks.
●
Store the net bag in the luggage compart-
ment.
WARNING
To secure the elastic net bag on the fastening
rings it must be stretched out. Once hooked
up it is taut. If the net bag is hooked up or un-
hooked incorrectly the hooks could cause in-
juries.
●
Always secure the net hooks properly so
that they do not suddenly release from the
fastening rings when hooking or unhooking
them.
●
On hooking or unhooking them, protect
your eyes and face in case the hooks are re-
leased suddenly.
●
Always hook up the net bag hooks in the
described order. If a hook is unexpectedly re-
leased the risk of injury is increased.
Luggage compartment variable floor
3 Applies to the model: LEON ST
Fig. 136 Luggage compartment variable
floor: positions.
Fig. 137 Luggage compartment variable
floor: grooves tilted.
Variable floor in the high position
●
Lift the floor using handle ››› Fig. 136
1
and pull it back until the front of the floor has
fully passed the supports
2
.
●
Move the floor forward over the supports as
far as the rear seat backrest and then lower
the floor with the handle
1
.
Variable floor in the low position
●
Lift the floor using handle ››› Fig. 136
1
and pull it back until the front of the floor has
fully passed the supports
2
.
●
Now match the front part with the lower
grooves of the supports and slide the floor
forwards as far as the rear seat backrest and
lower the floor at the same time with the han-
dle
1
.
Variable floor in the tilted position
When the variable floor is tilted you can ac-
cess the spare wheel/anti-puncture kit area.
●
Lift the variable floor using handle
››› Fig. 136
1
and pull it back until the front
of the floor has fully passed the tilted
grooves ››› Fig. 137
3
.
●
Run the floor through these grooves with
the help of handle
1
as the rear seat back-
rest and until the floor is resting in the
grooves.
WARNING
During a sudden driving or braking manoeu-
vre, or in the event of an accident, objects
could be flung though the interior and cause
serious or fatal injuries.
»
121
Technical specifications
AdviceOperationSafetyThe essentials
Loading ...
Loading ...
Loading ...