SR2AK9350U User Manual

Loading ...

ENGLISH-13

When the battery indicator blinks

during cleaning, the POWERbot

will return to the docking station to

charge itself automatically.

Automatic charging

You can command the POWERbot

to recharge at the docking station

while it is in cleaning.

Recharging

Manually charge the POWERbot by

placing it on the docking station.

Low battery (Lo)

Steps to take if recharging not occuring:

Check the installation status of the

docking station when:

fthedockingstationislocatedinaplacewherethe

POWERbotcannoteasilyaccessit.

fthedistancebetweenthedockingstationand

POWERbotisover20ft(5m)

- ItmaytakealongtimeforPOWERbottoreturnto

thedockingstationforrecharging

Manually charge the POWERbot when:

fthedockingstationislocatedinacorner

fthebatteryisfullyexhausted

fthePOWERbotisimmobilizedbyanobstacle

(furnitureetc.)

fthePOWERbotcan'tclimbathresholdnearthe

dockingstation(Themaximumheightofathreshold

thePOWERbotcanclimbisabout0.8in(2.0cm)).

fwhenthebatteryindicatorblinksand"Lo"is

displayed

fwhenthePOWERbotissettotheSpotcleanor

Manualcleanmode

00743A-03_3ge_USA.indb 13 2016-08-08 오후 2:17:34

Loading ...

User Manual - Page 13