Loading ...
Loading ...
Loading ...
7-40
Maintenance
Battery capacity label
❈ The actual battery label in the vehicle
may differ from the illustration.
1. CMF100L-DIN : The HYUNDAI
model name of battery
2. 12V : The nominal voltage
3. 100Ah(20HR) : The nominal
capacity (in
Ampere hours)
4. 190RC : The nominal reserve
capacity (in min.)
5. 780CCA (SAE) : The cold-test cur-
rent in amperes by SAE
6. 625A (EN) : The cold-test current
in amperes by EN
Battery recharging
Your vehicle has a maintenance-free,
calcium-based battery.
• If the battery becomes discharged
in a short time (because, for exam-
ple, the headlights or interior lights
were left on while the vehicle was
not in use), recharge it by slow
charging (trickle) for 10 hours.
• If the battery gradually discharges
because of high electric load while
the vehicle is being used, recharge
it at 20-30A for two hours.
For the vehicle equipped with
ISG system (AGM battery), be
careful not to damage the bat-
tery sensor when the battery is
replaced or recharged.
1) When replacing the battery, it
should be same one (type,
capacity and brand) that is
originally installed on your
vehicle. If a battery of a dif-
ferent type is replaced, bat-
tery sensor may recognize
the battery to be abnormal.
2) When installing the ground
cable on the negative post of
battery, tighten the clamp
with specified torque of 4.0 ~
6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~
4.41 lb-ft). An excessive tight-
ening torque can damage the
PCB internal circuit.
3) When recharging the battery,
ground the negative terminal
of the booster battery to the
vehicle body.
CAUTION
OEU074074
■ Example
Loading ...
Loading ...
Loading ...