Loading ...
Loading ...
Loading ...
2-15
Safety system of your vehicle
2
Seat belt warning
As a reminder to the driver, the seat
belt warning light is turned ON for
approximately 6 seconds each time
you turn the ignition switch ON
regardless of belt fastening.
When the vehicle start to move with-
out fastening the seat belt with the
ignition switch ON, the seat belt
warning light flashes until it stops.
When the vehicle drives faster than
20km/h without fastening the seat
belt with the ignition switch is ON, the
seat belt warning chime will sound
for approximately 100 seconds.
• No modifications or additions
should be made by the user,
as it may fail the seat belt
adjusting devices, or fail the
seat belt assembly from being
adjusted to remove slack to
be tightly fastened without
any slack.
• When you fasten the seat belt,
be careful not to latch the seat
belt tap in the buckles of other
seats.
It is very dangerous, and you
may not be properly protected
by the seat belt.
• Do not fasten or unfasten the
seat belt in a repetitive man-
ner, while driving. This may
result in loss of control, and
an accident, causing death,
serious injury, or property
damage.
(Continued)
WARNING
(Continued)
• While fastening the seat belt,
make sure that the seat belt is
not fastened over a hard or a
fragile object.
• Make sure that there is noth-
ing in the buckle. If so, the
seat belt may not be securely
fastened.
1GQA2083
Loading ...
Loading ...
Loading ...