Loading ...
Loading ...
Loading ...
20
English
Troubleshooting
Perform the following actions.
If the problems still cannot be solved, contact the store where
you purchased the unit or a service center authorized by
Panasonic for repair.
►Self-cleaning recharger
Problem Action
The blade has not been
thoroughly washed.
Do not add detergent and water
except when replacing the
cleaning liquid.
Doing so may deteriorate the
cleaning function. (See page 16.)
After cleaning, oil‑like droplets
may remain on the outside of the
foil frame. This is the lubricating
component of the cleaning liquid
and does not indicate a problem.
You may wipe it off with a soft
cloth.
The STATUS lamp glows.
See page 23.
Problem Action
The mode does not start.
Check that the AC adaptor is
connected to the self‑cleaning
recharger, and that the adaptor is
plugged in to a household outlet.
(See page 16.)
Confirm that the shaver is
properly attached to the self‑
cleaning recharger.
(See page 16.)
The Clean or Dry function may
not operate under extreme low
temperatures (approximately 0 °C
(32 °F) or lower).
Check if the STATUS lamp glows.
(See page 23.)
Cleaning liquid has
accumulated in the
cleaning tray.
Remove any waste, etc. that has
accumulated in the drain at the
bottom of the cleaning tray.
(See page 19.)
If you use the self‑cleaning
recharger when the shaver is wet
or when soap or shaving gel is on
the shaver, cleaning liquid may
accumulate in the cleaning tray.
ES-LT7N_US.indb 20 2015/04/17 17:45:29
Loading ...
Loading ...
Loading ...