Loading ...
Loading ...
Loading ...
13
English
Charging without the self-cleaning recharger
1
1
Insert the appliance plug into
the shaver.
• Turn the shaver off before inserting.
2
2
Plug in the adaptor into a
household outlet.
• Wipe off any water droplets on the
appliance socket.
1
2
3
3
Disconnect the adaptor after charging is
completed.
Note
You cannot operate the shaver while charging.
Using the shaver
1
1
Press the power switch.
• The power cannot be turned on when the switch lock lamp
( ) blinks, as the power switch is locked.
Press the power switch for more than 2 seconds to unlock.
(See page 11.)
2
2
Hold the shaver as illustrated.
3
3
Shave by slowly gliding the shaver over your
face against the grain of the beard.
• Start shaving by applying gentle pressure to your face.
Stretch your skin with your free hand and move the shaver
back and forth in the direction of your beard. You may gently
increase the amount of pressure as your skin becomes
accustomed to this shaver. Applying excessive pressure
does not provide a closer shave.
► Notes
• If you press the power switch for more than 2 seconds, the sonic
vibration cleaning mode is activated. (See page 17.)
You cannot shave in this mode.
• Do not place your fingers on the power switch while using the
shaver. This may cause the shaver to lock the power switch or
turn off. Place your fingers on the thumb rest while using the
shaver.
• The appliance may not operate in an ambient temperature
approximately 5 °C (41 °F) or lower.
ES-LT7N_US.indb 13 2015/04/17 17:45:28
Loading ...
Loading ...
Loading ...