Loading ...
Loading ...
Loading ...
6
GB
* See the table on page 7 for information on the buttons
that you can use to control each component.
Before using the remote for
the first time
Be sure to turn on the receiver and point the
remote towards the receiver when performing
the following procedure.
1 Press RM SET UP.
The set up list appears.
2 Move the easy scroll key to select
“AMP REGIST”, then press the key to
enter the selection.
The AMP REGIST list appears. When the
receiver name is already registered, it
appears on the second line.
3 Move the easy scroll key to select
“START”, then press the key to enter
the selection.
After “SEARCHING” appears, the model
name appears. The remote is optimized for
the model. (For TA-DA9000ES, VIDEO4,
VIDEO5, and i.LINK are added in the input
list.) If the model name does not appear,
check the followings and start over from
step 1.
• The power is turned on.
• The remote is kept pointing toward the
receiver until the model name appears.
cIR SET
LEARNING
DOWNLOAD
INPUT LIST
< AMP REGIST >
? ? ?
cSTART
Exit
Loading ...
Loading ...
Loading ...