Loading ...
Loading ...
Loading ...
Range Hood / User Manual
17 / 56 EN
6 Cleanng and mantenance
6.1 Mantenance
C
Before performng any mantenance
operaton, solate the hood from the
electrcal supply by swtchng off
at the connector and removng the
connector fuse.
Or f the applance has been
connected through a plug and
socket, then the plug must be
removed from the socket.
6.2 Cleanng
• Do not spray cleaners drectly to the control
whle cleanng the Hood.The cooker hood
should be cleaned regularly (at least wth the
same frequency wth whch you carry out
mantenance of the fat flters) nternally and
externally. Clean usng the cloth dampened wth
neutral lqud detergent. Do not use abrasve
products.
DO NOT USE ALCOHOL!
A
WARNING:
Falure to carry out
the basc cleanng recommendat-
ons of the cooker hood and repla-
cement of the flters may cause fre
rsks.
• Therefore, we recommend oservng these
nstructons.
• The manufacturer declnes all responsblty for
any damage to the motor or any fre damage
lnked to napproprate mantenance or falure
to observe the above safety recommendatons.
6.3 Grease Flter
Traps cookng grease partcles.
Ths must be cleaned once a month usng non
aggressve detergents, ether by hand or n
the dshwasher, whch must be set to a low
temperature and a short cycle. When washed
n a dshwasher, the grease flter may dscolour
slghtly, but ths does not affect ts flterng
capacty.
To remove the grease flter, pull the sprng release
handle.
6.4 Replacng the lght bulb
C
Before replacng the lamps, swtch
power off at servce panel and
lock servce panel dsconnectng
means to prevent power from beng
swtched on accdentally.
C
Turn off the lghts and fan. Allow
the lghts to cool before handlng.
If new lghts do not operate be sure
lghts are nserted correctly before
callng servce.
Replace Lghts
• Remove the damaged lght (twst counter
clockwse) and replace wth a new 120 Volt, 50
Watt (maxmum) 50° halogen lght made for a
GU10 base, sutable for use n open lumnare.
Loading ...
Loading ...
Loading ...