Loading ...
Loading ...
Loading ...
14 / 56 EN
Range Hood / User Manual
4 Installng your applance
Outsde top exhaust
(Vertcal duct–7” Round)
Use the dagram or the hood as a template and
mark the locatons on the cabnet for ductwork,
electrcal wrng and keyhole screw slots.
Outsde rear exhaust
(Horzontal duct– 3 1/4”x 10” Rectangular)
• Use the dagram or the hood as a template and
mark the locatons on the cabnet for ductwork,
electrcal wrng and keyhole screw slots.
Recrculatng
Use the hood as a template and mark the locatons
on the cabnet for the electrcal wrng and keyhole
screw slots.
Snce the hood s to be recrculated (not to be
vented outsde), do not cut out any vent openngs
n the wall or cabnet bottom.
Step 9
Choose Ventng Opton
The hood can be set to vent outsde or to
recrculate ar back nto the ktchen.
The plastc vent lever s located near the center of
the hood openng.
To vent to the outsde, make sure the plastc vent
lever s n the HORIZONTAL poston (flat aganst
the metal top of the hood).
To recrculate ar nto the ktchen, make sure the
plastc vent lever s n the VERTICAL poston (flat
aganst the plastc blower housng).
C
In order to change the vent lever
poston, you wll need to pull the
lever out slghtly to clear the plastc
tabs.
Step 10
For recessed bottom cabnet only
If the cabnets have front, sde or back trm, make
2 wood shms the wdth of the trm and attach
them to the cabnet bottom recess on both sdes.
See prevous page for markng locatons.
Loading ...
Loading ...
Loading ...