Loading ...
Loading ...
Loading ...
3. Top up with rinse aid
Use rinse aid to improve wash and dry times. Also use rinse aid to
achieve clear and spotless results.
Press to open
1 Open the rinse aid compartment lid.
2 Carefully top up with rinse aid. Only add rinse aid to the level marked
max.
3 Wipe up any spilled rinse aid around the compartment.
4 Close the lid firmly.
Add rinse aid
When the rinse aid needs topping up, the above symbol lights on the
display.
After topping up, it may take a while before the symbol goes out.
NOTE!
Increase the rinse aid dosage:
• If the dishes have water marks.
Reduce the rinse aid dosage:
• If the dishes have a sticky white/blue film.
• If the dishes are streaked.
• Heavy foaming. If you have very soft water, the rinse aid can be
diluted 50:50 with water.
4. Fill up with salt
Before you begin using a dishwasher with a water softener, you must
fill the salt compartment with salt for the water supply to be softened
automatically. Use large grain salt or special dishwasher salt.
WARNING!
In order to avoid rust stains, a dishwashing program must be started
immediately after adding salt.
Never pour dishwasher detergent into the salt compartment. This
destroys the water softener!
Do as follows the first time:
1 Unscrew the lid as illustrated.
2 Insert the funnel supplied with the dishwasher in the salt
compartment top-up hole. First, pour in about 0.3 gal (1 l) of water.
3 Then add salt, a maximum of 2 lb (1.0 kg), until the compartment
is full.
4 Wipe up any excess salt so that the lid can be screwed on firmly.
5 Run a program to ensure that any salt in the dishwasher is rinsed
away.
Salt compartment lid
Add salt
When the salt needs topping up, the above symbol lights on the display.
When the salt runs out, unscrew the cap and fill the container with salt.
Water is only needed the first time! Wipe clean and tighten. Run a
program to ensure that any salt in the dishwasher is rinsed away.
After topping up, it may take a while before the symbol goes out.
5
Loading ...
Loading ...
Loading ...