Loading ...
Loading ...
Loading ...
Unblocking the drain pump
If the dishwasher still contains water after the program has finished,
something may be blocking the drain pump. Such items are easily
removed.
1 Turn off the machine using the main power switch and unplug it
from the power outlet.
2 Remove the coarse filter and the fine filter.
3 Scoop out the water from the dishwasher tub.
4 In order to inspect the drain pump, remove the colored stop on the
right in the bottom drain.
5 Turn the pump wheel located behind the drain pump stop by hand.
Carefully remove any items.
6 Replace the drain pump stop along with the fine and coarse filters.
7 Plug the machine in again.
If the dishwasher still does not start and a whirring sound is heard,
the overflow protection has been triggered.
• Shut off the water.
• Unplug the unit from the power outlet.
• Call the Customer Care Center.
Drain pump stop
NOTE!
Do not forget to replace the drain pump stop.
16
Loading ...
Loading ...
Loading ...