Loading ...
Loading ...
Loading ...
Eco
Speed mode
2:00
START
STOP
Select a program mode Select any options
Open the door and press the main power switch.
Select the program
Starting the dishwasher
The main power switch
Open the door and press the main power switch. Also turn on the water
supply valve if it is turned off.
Select a program
To select a program, press the Navigation button or until the desired
program is shown on the display.
Select a program to suit the type of dishes and how dirty they are.
Normal wash
This program is recommended for daily, regular, or typical use to
completely wash a full load of normally soiled dishes, such as plates,
serving dishes, cups, and glasses.
ECO wash
This program is the most effective in terms of energy consumption.
You can read more about greener dishwashing in the chapter Loading
the dishwasher.
Sanitation wash
An effective program for daily use with slightly dried leftovers. (This
program is not intended for burnt food, such as on oven dishes.)
Time program
The program adapts to the specified running time or finish time. With
this program, it is important to choose a time suited to how dirty the
dishes are.
Lightly soiled dishes0:15-0:45
Normally soiled dishes1:00-1:30
Heavily soiled dishes2:00-2:30
Press the option button to set the desired program time.
Rinse and hold
Use to rinse dishes while you wait for the dishwasher to become fully
loaded.
Plastic wash
A program intended for washing plastic items that are dishwasher safe.
This program has an extra long drying cycle. Porcelain and glasses
can also be washed.
Hygiene wash
This program is recommended for baby bottles and cutting boards
when additional sanitation is required. The temperature is high in the
main wash and in the final rinse.
Crystal glass
A gentle dishwashing program with a low temperature for washing
fragile items made of crystal/glass, such as crystal glass from Orrefors.
Remember to use a small amount of detergent and to place items so
that they do not touch each other during the wash. See also Fragile
dishes in the chapter Loading the dishwasher. Porcelain that has just
been used without dried leftovers can also be washed using this
program.
Self-cleaning
Self-cleaning program for sanitizing the dishwasher tub, spray arms,
and spray pipes.
This program should be run (with no dishes in the machine) using
regular dishwasher detergent or citric acid. Special dishwasher
cleaners are also available in stores. For the removal of limescale
deposits, see The dishwasher tub in the chapter Care and maintenance
instructions.
Upper half
You can use this program if you only have cups and glasses that need
washing in the upper basket. Lightly soiled dishes can also be placed
in the lower basket.
Lower half
You can use this program when you only want to wash plates and
cutlery in the lower basket. Lightly soiled dishes can also be placed
in the upper basket.
Select a program mode
To select a program mode, press the program mode selector until the
desired mode is shown on the display. The available program modes
vary between programs.
Green mode
The dishwasher uses less energy and water. The program time is
extended.
Speed mode
The program time is shortened, but the dishwasher uses more energy.
Night mode
Lower noise level during the dishwashing program. The program time
is extended.
Intensive mode (Heat Boost)
Improves the dishwashing results, but the dishwasher uses more energy
and water. The program time is extended.
Select an Option
To select an option, press the option button until the desired option is
shown on the display. The available options vary between programs.
Extra Dry (Heated drying option)
A higher temperature in the final rinse and a longer drying cycle
improve the drying results if you activate this option. Energy
consumption is slightly increased.
Delayed Start
When you select Delayed Start, the dishwasher will start 1-24 hours
after you have pressed the button Start/Stop and closed the door.
10
Loading ...
Loading ...
Loading ...