Loading ...
Loading ...
Loading ...
DRIVING THROUGH WATER
Your ATV can operate through water with a maximum recommended depth
equal to the bottom of the footrests. Follow these procedures when operating
through water:
1. Determine water depths and current before entering water.
2. Choose a crossing where both banks have gradual inclines.
3. Avoid operating through deep or fast-flowing water.
NOTICE
Major engine damage can result if the vehicle is not thoroughly inspected
after operation in water. Perform the services outlined in the Periodic
Maintenance Chart. The following areas need special attention: engine oil,
transmission oil, demand drive fluid and all grease fittings.
If the vehicle tips or overturns in water, or if the engine stops during or after
operating in water, service is required before starting the engine. Your
POLARIS dealer can provide this service. If it's impossible to bring the vehicle
in before starting the engine, perform the service outlined in the Vehicle
Immersion section of this manual, and take the vehicle in for service at the
first opportunity.
4. After leaving water, test the brakes. Apply them lightly several times while
driving slowly. The friction will help dry out the pads.
If it’s unavoidable to enter water deeper than the footrest level:
• Proceed slowly. Avoid rocks and obstacles.
• Balance your weight carefully. Avoid sudden movements.
• Maintain a steady rate of speed. Do not make sudden turns or stops. Do not
make sudden throttle changes.
77
OPERATION
Loading ...
Loading ...
Loading ...