Loading ...
Loading ...
Loading ...
LUBRICATION GUIDE
Check and lubricate all components at the intervals outlined in the Periodic
Maintenance Chart. Items not listed in the chart should be lubricated at the
General Lubrication interval.
The a-arms and lower control arms are lubricated at the factory, and no
additional lubrication will be needed. However, if these components are
subjected to severe use, grease zerks have been provided for additional
lubrication at the user's discretion.
ITEM LUBE CAPACITY AT FLUID
CHANGE
INSPECTION
PROCEDURE
Engine Oil (450/570) PS-4 5W-50 4-Cycle
Oil
2 qt. (1.9 l) Maintain level in safe
range on dipstick.
Brake Fluid DOT 4 Brake Fluid - Maintain level
between fill lines.
Transmission Oil AGL Gearcase
Lubricant &
Transmission Fluid
32 oz. (948 ml) Maintain level at
bottom of fill hole
threads.
Demand Drive (Front
Gearcase)
Demand Drive 9 oz. (265 ml) Maintain level at
bottom of fill hole
threads.
Front Prop Shaft U-Joint Grease - Grease fittings (3
pumps maximum)
every 500 miles,
before long periods of
storage, or after
pressure washing or
submerging.
ENGINE OIL
Always check and change the oil at the intervals outlined in the Periodic
Maintenance Chart. Always use the recommended engine oil. Always change
the oil filter whenever changing oil.
Pay special attention to the oil level. A rise in oil level during cold weather can
indicate contaminants collecting in the oil sump or crankcase. Change oil
immediately if the oil level begins to rise. Monitor the oil level, and if it continues
to rise, discontinue use and determine the cause. Your dealer can assist.
WARNING
Vehicle operation with insufficient, deteriorated, or contaminated engine oil will
cause accelerated wear and may result in engine seizure, accident and injury.
Always perform the maintenance procedures as outlined in the Periodic
Maintenance Chart.
107
MAINTENANCE
Loading ...
Loading ...
Loading ...