1. Home
  2. Polaris
  3. Polaris SPORTSMAN 450 H.O. User Manual
  4. Page 125

User Manual - Page 125

For SPORTSMAN 450 H.O.. Also, The document are for others Polaris models: SPORTSMAN 570, SPORTSMAN 570 EPS, SPORTSMAN 570 EFI, SPORTSMAN 570 SP, SPORTSMAN 570 HD, SPORTSMAN 570 UTILITY EDITION, SPORTSMAN 570 SP HUNTER EDITION, SPORTSMAN 450 HO, SPORTSMAN 450 HO EPS, SPORTSMAN 450 HD, SPORTSMAN 450 UTILITY EDITION, SPORTSMAN TOURING 570, SPORTSMAN TOURING 570 EPS, SPORTSMAN TOURING 570 SP, SPORTSMAN X2 570 EPS, UTE 570 HD, SPORTSMAN 6X6 570

Loading ...
Loading ...
Loading ...
HIGH BEAM ADJUSTMENT
The headlight beam can be adjusted slightly upward or downward. Use the
following procedure to make the adjustment.
NOTE
Image below is for reference only. Your model may differ slightly.
1. Position the vehicle on a level surface with the headlight approximately 25 ft.
(7.6 m) from a wall
q
. Place the transmission in PARK.
2. Measure the distance from the floor to the center of the headlight and make a
mark on the wall at the same height.
3. Start the engine. Turn the headlight switch to high beam.
4. Observe the headlight aim on the wall. The most intense part of the headlight
beam should be 2 in. (5 cm) below the mark on the wall
w
. Include rider
weight on the seat when measuring.
5. The adjustment screw is located on the right side of the headlight pod. To
adjust the beam, loosen the screw. Adjust the headlamp to the desired
position, then tighten the screw.
123
MAINTENANCE
Loading ...
Loading ...
Loading ...