Loading ...
Loading ...
Loading ...
©2017 Spectrum Brands, Inc.
1. Keep door open. Press and HOLD the Program
button until the Checkmark symbol illuminates
(about 5 seconds).
2. Press Checkmark symbol once. 3. Press Lock symbol once.
4. Enter Mastercode. 5. Press Lock symbol once. 6. Re-enter Mastercode.
7. Press Lock symbol once. If programming is successful, the Checkmark
will illuminate and you will hear one beep.
If programming is unsuccessful, the “X” pattern
will ash three times, and you will hear three
beeps. Make sure the Mastercode has been
enabled before trying to disable it. Attempt the
procedure again, making sure to enter the same
Mastercode in step 4 and 6.
Make sure switch #3 is on, and press
the Program button once. If you don’t
immediately hear ve beeps and see the
Checkmark ash ve times, the
Mastercode is disabled.
66852 / 01
954
6 / 16
Technical Support
1-866-863-6584
www.kwikset.com
F
Disabling and Deleting the Mastercode
Loading ...
Loading ...
Loading ...