Loading ...
Loading ...
Loading ...
The essentials
Engine oil specifications
Service interval Engine type Specification
Petrol engines with Set Service Intervals (dependent on
time/distance travelled)
1.4l CNG / 1.4l 110kW without ACT VW 502 00
1.0l / 1.2l / 1.4l 92kW / 1.4l 110kW with ACT / 1.8l / 2.0l VW 504 00
1.2l / 1.4l 110kW without ACT / 1.6l / 1.8l / 2.0l VW 502 00
a)
Petrol engines with Flexible Service Intervals (LongLife)
1.0l / 1.2l / 1.4l VW 508 00 / VW 504 00
b)
1.8l / 2.0l VW 504 00
Diesel engines with Set Service and Flexible Service In-
tervals
c)
With particulate filter (DPF) VW 507 00
Diesel engines with Set Service Intervals Without particulate filter (DPF) VW 505 01
a)
/ VW 506 01
a)
a)
If the quality of the fuel available in the country does not fulfil the EN 228 (for petrol) and EN 590 (for diesel) standards.
b)
Use of engine oil compliant with the VW 504 00 specification instead of VW 508 00 may have a slight negative effect on the vehicle’s exhaust gas values.
c)
Only use recommended oils, otherwise you may damage the engine.
››› in Changing engine oil on page 274
››› page 272
Coolant
Fig. 63 Engine compartment: coolant expan-
s
ion t
ank
cap.
The coolant tank is located in the engine
c
omp
ar
tment ›››
page 270.
When the engine is cold, replace the coolant
when the level is below .
Coolant specifications
The engine cooling system is supplied from
the factory with a specially treated mixture of
water and at least 40 % of the additive G13
(TL-VW 774 J), purple. This mixture gives the
necessary frost protection down to -25°C
(-13°F) and protects the light alloy parts of
the engine cooling system against corrosion.
It also prevents scaling and considerably rai-
ses the boiling point of the coolant.
60
Loading ...
Loading ...
Loading ...