Loading ...
Loading ...
Loading ...
Fuses and bulbs
–
R
emo
ve the lid, levering the flat side of a
screwdriver into the recess
›››
Fig. 58
1
.
–
Remove the bulb connector
2
.
–
Unscrew the light securing bolt
3
by hand
or using a scr
e
wdriver.
–
Remove the light from the body, gently pull-
ing it toward you, and place on a clean,
smooth surface.
–
Remove the bulb holder unlocking the re-
taining tabs
›››
Fig. 59
A
.
–
Change the damaged bulb.
–
To refit follow the steps in reverse order, tak-
ing special car
e when fitting the bulb hol
d-
er. The securing tabs must click into place.
CAUTION
Take care when removing the rear light unit
to mak
e sure there is no damage to the
paintwork or any of its components.
Note
●
Make sur
e you have a soft cloth ready to
place under the glass on the rear light unit,
to avoid any scratches.
●
For LED lights, you can only change the
turn signal and reverse light bulbs.
Number plate light
–
Insert the flat part of a screwdriver into the
special slot and r
emove the bulb.
–
Remove the bulb holder, by turning it until it
is free.
–
Change the bulb.
–
Replace the bulb holder, by turning it until it
fits fully.
–
Fit the light into the space and press until
you hear a “click”.
Note
Depending on how equipped the vehicle is,
the number plat
e lights may be LEDs. LEDs
have an estimated life that exceeds than
that of the car. If a light with LEDs fails, go
to an authorised workshop for replace-
ment.
Side turn signals
Fig. 60
Turn signal integrated in the rear view
mirr
or
The side turn signals are LEDS and are inte-
gr
at
ed in the rear view mirrors.
In case of failure, go to an authorised work-
shop to have it replaced.
Additional brake light
Taking into account that it consists of LED
bulbs, the change shoul
d be made at a t
ech-
nical service centre.
63
Loading ...
Loading ...
Loading ...