Loading ...
Loading ...
Loading ...
Driver assistance systems
Ultrasound sensors
The bumpers are fitted with ultrasound sen-
sors to perf
orm the following functions:
●
Parking aid Plus
›››
page 236.
●
Rear parking aid
›››
page 238.
CAUTION
●
Damage to the r
adiator grille, bumper,
wheel arch and vehicle underbody can
modify the orientation of the sensors. This
can affect the parking aid function. Have
the function checked by a specialised
workshop.
●
A number plate or number plate holder
with dimensions that exceed the space for
the number plate, or a cured or deformed
number plate can cause false detections or
a loss of visibility for the sensors.
Note
●
In order t
o guarantee good operation,
keep the sensors clean, free of snow and
ice, and do not cover them with stickers or
other objects.
●
If you use high-pressure or vapour equip-
ment for cleaning, do not apply it directly,
unless you do so very briefly, and always
keep a distance of more than 10 cm away.
●
Fitting certain accessories to the front of
the vehicle, such as a plate holder with ad-
vertising, may interfere with the operation
of the Park Assist.
Rear View Camera
Fig. 148
In the rear bumper: location of the re-
v
erse assist camer
a.
A camera on the rear bumper aids the driver
when r
e
verse parking or manoeuvring. This
provides support to the following function:
●
Rear View Camera
›››
page 239.
WARNING
Fitting a number plate frame may interfere
with the view sho
wn on the screen, as it
may reduce the camera’s field of vision.
CAUTION
●
In order t
o guarantee good system oper-
ation, keep the cameras clean, free of snow
or ice, and do not cover them with stickers
or other objects.
●
Ne
ver use abrasive cleaning products to
clean the camera lens.
●
Do not use hot or warm water to remove
ice or snow from the camera lens. Doing so
could damage the camera.
Cruise control system
(CCS)*
Control l
amp
It lights up green
The Cruise Control System (GRA) is switched on and
active
.
OR: The Adaptive Cruise Contr
ol system (CCS) is
switched on and active.
OR: the speed limiter is s
witched on and active.
The control lamps light up when the ignition is
s
wit
ched on and should turn off after approxi-
mately 2 seconds. This is the time taken for
the function check.
WARNING
Observe the safety warnings
››
›
in Con-
trol and w
arning lamps on page 85.
213
Loading ...
Loading ...
Loading ...