Loading ...
Loading ...
Loading ...
Driving
You can cancel this regulation by changing
the set speed or by pr
essing the accel
erator
pedal.
The function works at speeds over 80 km/h
(50 mph). It may not be available in certain
countries.
Overtaking
When the turn signal is switched on for over-
taking, the ACC reduces the distance from
the vehicle in front to help with the overtaking
manoeuvre. The set cruising speed will not be
exceeded.
The function works at speeds over 80 km/h
(50 mph). It may not be available in certain
countries.
Stop&Go function
3 Valid for: vehicles with an automatic gearbox
The ACC can bring the vehicle to a standstill
(0 km/h) if the vehicle in front stops.
The ACC remains active and the message
ACC ready to start is displayed on the in-
strument cluster for a few seconds. During
this time, the vehicle will move off again if the
vehicle in front moves forwards.
If the vehicle in front does not move off, the
vehicle can be kept at a standstill with the
status ACC ready to start by pressing the
brake.
The system can only keep the car stopped
for a few seconds. After this, the Brake warn-
ing will be displayed and an audio warning
will be played. Press the brake pedal. The ve-
hicle may start moving forward if you do not
do this Accident hazard!
The ACC is deactivated while stopped in the
following cases:
●
If the vehicle stops for several minutes.
●
If a door is opened.
WARNING
If the message ACC ready to start is dis-
played on the instrument clust
er display
and the vehicle in front moves off, your ve-
hicle will move off automatically. In this
case, any obstacles in the road may not be
detected. This may cause serious acci-
dents and injuries.
●
Always check the road before moving off,
and apply the vehicle brakes yourself if
necessary.
ACC system limitations
Fig. 161
Vehicl
e on a bend.
Motorcyclist
ahead, out of range of the radar sensor.
226
Loading ...
Loading ...
Loading ...