Loading ...
Loading ...
Loading ...
Installation en
25
Removing the appliance
:Warning – Risk of injury!
Components inside the appliance may have sharp
edges. Wear protective gloves.
:Warning – Risk of injury!
Risk of trapping body parts when opening and closing
the hinges. Keep your hands away from the hinges.
1. Disconnect the appliance from the power supply.
2. Swing down the filter cover.
3. Remove the metal grease filters.
4. Press together the cable duct at the sides and
remove it.
5. Loosen the screws on the side covers.
6. Remove the side covers.
7. Undo the screws on the hinges up to approx. 7 mm.
Note: Do not loosen them fully.
8. Unhook and remove the filter cover.
9. Loosen the screws on the fan box, remove the
ducting and pull out the mains plug. Then screw the
fan box firmly back in place.
10. Loosen the screws on the mounting covers.
11. Push the removal slide inwards to loosen the
mounting brackets.
12. Release the appliance slowly at an angle.
13. Insert the side covers into the corresponding
openings and screw them in.
Loading ...
Loading ...
Loading ...