Loading ...
Loading ...
Loading ...
Installation en
23
5. Push the fan box to the side and connect the power
supply.
6. Push the fan box to the other side and connect the
ducting.
7. Position the fan box in the centre and screw it firmly
in place.
8. Connect the cable.
9. Press together the cable duct at the sides, attach
and click into place.
Fitting the filter cover
:Warning – Risk of injury!
Components inside the appliance may have sharp
edges. Wear protective gloves.
:Warning – Risk of injury!
Risk of trapping body parts when opening and closing
the hinges. Keep your hands away from the hinges.
Note: Avoid scratching the side covers as they are
within view.
1. Open the hinges on the filter cover.
2. Mount the filter cover on the designated screws and
push it backwards/forwards depending on the key
hole opening into the narrow section.
3. Tighten the fastening screws of the hinges.
4. Check whether the appliance frame is lying flush.
Tighten the screws once again if necessary.
5. Undo the screws on the hinges up to approx. 7 mm.
Note: Do not loosen them fully.
Loading ...
Loading ...
Loading ...