Loading ...
Loading ...
Loading ...
Symbol What It Means What To Do
ENGINE COOLANTTEMPERATURE TOO HIGH
The telltale lights up when the engine has overheated.
In normal driving conditions: stop the car, turn off the
engine and check that the coolant level in the reservoir is
not below the MIN mark. In this case, wait for the engine
to cool down, then slowly and carefully open the cap, fill
with coolant and check that the level is between the MIN
and MAX marks on the reservoir itself. Also check visually
for any fluid leaks. Contact an authorized dealer if the
telltale comes on when the engine is started again.
If the vehicle is used under demanding conditions (e.g. in
high-performance driving): slow down and, if the warning
light stays on, stop the vehicle. Stop for 2 or 3 minutes
with the engine running and slightly accelerated to
facilitate better coolant circulation, then turn the engine
off. Check that the coolant level is correct as described
above.
POWER STEERING FAILURE
If the telltale remains on, you could not have steering
assistance and the effort required to operate the steering
wheel could be increased; steering is, however, possible.
Note:
After the battery is disconnected, the steering wheel must
be initialized. The Power Steering Failure light on the
instrument panel will illuminate to indicate this. To carry
out this procedure, simply turn the steering wheel all the
way from one end to the other, and then turn in back to the
central position.
Contact an authorized dealer as soon as possible.
DOOR OPEN
The telltale turns on when one or more doors are not
completely shut. An acoustic signal is activated with the
doors open and the car moving.
Close the doors properly.
77
Loading ...
Loading ...
Loading ...