Loading ...
Loading ...
Loading ...
2. Open protective cover up and remove
the bulb pulling out of the connector.
3. Install bulb, making sure that it is
correctly inserted fully.
4. Close the protective cover on the lens.
5. Install puddle light in the correct
position, inserting it firstly on one side
and then pressing on the other side until
it clicks into place.
FUSES
General Information
The fuses protect electrical systems
against excessive current.
When a device does not work, you must
check the electrical circuit inside of the
fuse for a break/melt.
Also, please be aware that using power
outlets for extended periods of time with
the engine off may result in vehicle
battery discharge.
Fuse Extracting Pliers
To replace a fuse, use the pliers hooked
to the fuse box.
08026S0012EM
Puddle Light Indent
08026S0011EM
Cover And Bulb Removal Direction
2
3
1
0726067916
Blade Fuses
1 — Electrical Circuit
2 — Blade Fuse With Good Electrical
Circuit
3 — Blade Fuse With Bad Electrical Cir-
cuit
08036S0002EM
J-CASE Fuse
1 — Electrical Circuit
2 — Case Fuse With Good Electrical Cir-
cuit
3 — Case Fuse With Bad Electrical Cir-
cuit
08036S0053EM
Fuse Box
175
Loading ...
Loading ...
Loading ...