Loading ...
Loading ...
Loading ...
Break recommendation
Settings
The alertness assistant is active automatically
with each switching on of drive-ready state and
can thus display a break recommendation.
The break recommendation can also be
switched on or off and adjusted via iDrive.
Via iDrive:
1. "CAR"
2. "Settings"
3. "General settings"
4. "Fatigue and Focus Alert"
5. Select desired setting:
▷ "Standard": the break recommendation is
made with a defined value.
▷ "Sensitive": the break recommendation is
issued earlier.
▷ "Off": no break recommendation is made.
Display
If the driver becomes less alert or fatigued, a
message is displayed in the Control Display with
the recommendation to take a break.
During the display, the following settings can be
selected:
▷ "Do not ask again"
▷ "Places to stop"
▷ "Remind me later"
The break recommendation is repeated after
20 minutes.
After a break, another recommendation to take a
break cannot be displayed until after approxi‐
mately 45 minutes.
System limits
The function may be limited in the following sit‐
uations, for instance and will either output an in‐
correct warning or no warning at all:
▷ When the clock is set incorrectly.
▷ When the vehicle speed is mainly below
about 43 mph/70 km/h.
▷ With a sporty driving style, such as during
rapid acceleration or when cornering fast.
▷ In active driving situations, such as when
changing lanes frequently.
▷ When the road surface is poor.
▷ In the event of strong side winds.
The system is reset approx. 45 minutes after
parking the vehicle, for instance in the case of a
break during longer trips on highways.
Seite 212
CONTROLS
Safety
212
Online Edition for Part no. 01402896765 - X/18
Loading ...
Loading ...
Loading ...