User Manual - Page 53

For LSR100.

Loading ...
Loading ...
Loading ...
53
EN
Symptoms Reason Solution
The appliance door is
not closed tightly.
Is the appliance leaning
forward?
Adjust the front feet to raise the front
side slightly.
Were the shelves properly
assembled?
Refit the shelves if needed.
Did you close the door with
excessive force?
If you apply too much force or speed
when closing the door, it may remain
briefly open before closing. Make
sure that you do not slam the door
closed. Close without force.
It is difficult to open
the appliance door.
Did you open the door right
after you closed it?
If you try to open the appliance door
within one minute after you closed it,
you may have difficulties because of
the pressure inside the appliance.
Try to open the appliance door again
in a few minutes so that the internal
pressure stabilizes.
Door mullion does not
fold in and out
properly.
Are front leveling legs
extended, appliance level, and
doors aligned?
Once the door baskets are filled, the
doors may become misaligned,
preventing the door mullion or the
Auto Open Door function from
working properly. Extend both front
leveling legs fully so they are in firm
contact with the floor. Follow the
instruction in the Door Alignment
section to raise the left appliance
door until the door mullion is once
again working properly. Adjust the
right appliance door so it aligns with
the left appliance door.
Loading ...
Loading ...
Loading ...