User Manual - Page 17

For LSR100.

Loading ...
Loading ...
Loading ...
17
EN
Removing the Door
When it is necessary to move the appliance
through a narrow opening, removing the doors
is the recommended procedure.
WARNING
Disconnect the power cord, house fuse or
circuit breaker before installing or servicing the
appliance. Failure to follow these instructions
may result in death, fire or electric shock.
If your entrance door is too narrow for the
appliance to pass through, remove the
appliance doors and pass the appliance
laterally.
[The Left Fridge Door]
1
The water supply is connected to the upper
right part of the rear surface of the
refrigerator. Remove the ring in the joint
area. Hold the water supply connection and
gently push the collet to detach the water
supply line as shown in (1).
(1)
collet
NOTE
Detaching the water supply is only necessary
when detaching the left refrigerator door.
2
Remove the screws from the hinge cover at
the top of the refrigerator. Lift the hook (not
visible), located on the side of the cover at
the bottom edge, with a flat-head
screwdriver.
3
Remove the cover and pull out the tube (1).
Disconnect all wire harnesses (2).
4
Rotate the hinge lever counterclockwise (1).
Lift the top hinge (2) free of the hinge lever
latch.
(1
)
(2)
Hinge Lever Latch
CAUTION
When lifting the hinge free of the latch, be
careful that the door does not fall forward.
5
Remove the hinge lever by tapping the end
of it toward the outside edge of the cabinet.
CAUTION
When lifting the hinge free of the latch, be
careful that the door does not fall forward.
Loading ...
Loading ...
Loading ...