Loading ...
Loading ...
Loading ...
19
EN
NOTE
• Gently insert the tube until only one of the
tube’s lines is visible.
(Correct)
(Incorrect)
• Pull on the tube to make sure that it is tightly
fastened.
[The Right Fridge Door]
1
Remove the screws from the hinge cover at
the top of the refrigerator. Lift the hook (not
visible), located on the side of the cover at
the bottom edge, with a flat-head
screwdriver.
2
Detach the wire harness (1).
3
Rotate the hinge lever (1) clockwise. Lift the
top hinge (2) free of the hinge lever latch.
Hinge Lever Latch
CAUTION
• When lifting the hinge free of the hinge lever
latch, be careful that the door does not fall
forward.
4
Lift the door from the middle hinge pin and
remove the door.
CAUTION
• Place the door on a non-scratching surface
with the inner side facing up.
[The Freezer Doors]
1
Remove the two hinge bolts.
EN
2
Twist the hinge to raise the pivoting end so
that the door can be lifted off. Lift the door
off the lower hinge pin and remove it.
3
Unscrew the screw that attaches the lower
hinge cover and remove the cover.
(1)
(2)
4
Disconnect all wire harnesses.
5
Remove the door by lifting it off the lower
hinge pin.
Lower Hinge
Refitting the Door
Mount the doors in the reverse sequence of
their removal once the appliance has been
passed through all access doors.
Adjusting the Height of the
Door
[Fridge Door Height]
Open the fridge door and use the spanner type
1 to rotate the door hinge bolt as shown below.
Height difference
Fridge door
Freezer door
[Freezer Door Height]
[Method1]
Open the freezer door and use the spanner
type1 to rotate the door hinge bolt as shown.
Height difference
Freezer door
Loading ...
Loading ...
Loading ...