Loading ...
Loading ...
Loading ...
8 49-80784-1
Special
Features
Your new touch pad control has additional features that you may choose to use. The following are
the features and how you may activate them. The special feature modes can only be activated
while the display is showing the time of day. They remain in the control’s memory until the steps are
repeated. To enter a special feature for either oven, you must first touch the upper oven Broil Hi/
Lo and Bake pads at the same time. The lower oven Broil Hi/Lo and Bake pads will not activate
special features. When the display shows your choice, touch the Start pad. The special features will
remain in memory after a power failure, except for the Sabbath feature, which will have to be reset.
Help
Touch this pad to get additional information on
the keypad of your choice. Touch the Help pad
and the display will show “Press keypad for
help on that feature or 1 for options.” All special
feature can be adjusted using the method
described here or through help.
12-Hour Shutdown
With this feature, should you forget and leave
the oven on, the control will automatically
WXUQRႇWKHRYHQDIWHUKRXUVGXULQJEDNLQJ
functions or after 3 hours during a broil function.
,I\RXZLVKWRWXUQRႇWKLVIHDWXUHIROORZWKHVH
steps. Touch the Delay Start pad until “no shdn”
QRVKXWRႇDSSHDUVLQWKHGLVSOD\7RXFKWKH
StartSDGWRDFWLYDWHWKHQRVKXWRႇDQGOHDYH
the control set in this special features mode.
Fahrenheit or Celsius
Your oven control is set to use the Fahrenheit
temperature selections, but you may change
this to use the Celsius selections. Touch the
Cook Time and Broil Hi/Lo pads at the same
time. The display will show “F” (Fahrenheit).
Touch the Cook Time and Broil Hi/Lo pads
again at the same time. The display will show
“C” (Celsius). Touch the Start pad.
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds
until the Clear/Off pad is touched. This
continual 6-second beep may be canceled.
To cancel the 6-second beep, follow these
steps. Touch the Broil pad. The display shows
“CONTI BEEP” (continuous beep). Touch the
Broil pad again. The display shows “SINGLE
BEEP”. (This cancels the one beep every 6
seconds.) Touch the Start pad.
Tone Volume
This feature allows you to adjust the tone
volumes to a more acceptable volume. There
are three possible volume levels. Touch the
Cook Time pad. The display will show “2
beep”. This is the middle volume level. Touch
the Cook Time pad again. The display will
show “3 beep”. This is the loudest volume level.
Touch the Cook Time pad again. The display
will show “1 beep”. This is the quietest volume
level. For each time the level is changed, a
tone will sound to provide an indication of the
volume level. Choose the desired sound level
(1 beep, 2 beep, 3 beep). Touch the Start pad
to activate the level shown.
12-Hour, 24-Hour or
Clock Blackout
Your control is set to use a 12-hour clock. If
you would prefer to have a 24-hour military time
clock or black out the clock display, follow these
steps. Touch the Clock pad once. The display
will show “12 hr”. If this is the choice you want,
touch the Start pad. Touch the Clock pad again
to change to the 24 hour military time clock. The
display will show “24 hr”. If this is the choice you
want, touch the Start pad. Touch the Clock pad
again to black out the clock display. The display
will show “OFF”. If this is the choice you want,
touch the Start pad. NOTE: If the clock is in the
black-out mode you will not be able to use the
Delay Start function.
Auto Recipe™ Conversion
When using convection bake, the Auto
Recipe™ Conversion feature will automatically
convert entered regular baking temperatures to
convection baking temperatures. This feature is
activated so that the display will show the actual
converted (reduced) temperature. For example,
if you enter a regular recipe temperature of
350°F and touch the Start pad, the display will
show “CON” and the converted temperature
of 325°F. To deactivate the feature, follow
these steps. Touch the Convection Bake pad.
The display will show “CON ON”. Touch the
Convection Bake pad again. The display will
show “CON OFF”. Touch the Start pad.
Using the Oven
Wall Oven
Loading ...
Loading ...
Loading ...