Loading ...
Loading ...
Loading ...
16
Fitting the cuff properly
1) Place the cuff over the upper arm so that the air tube
and artery mark arrow point towards the lower arm.
The artery mark on the cuff must be placed over the
brachial artery.
2) Lay the cuff on the arm. Make sure that the lower edge
of the cuff lies approximately 2 to 3 cm ( ¾ to 1 inch)
above the elbow.
2-3 cm
(3/4 to 1 inch)
Reusable ProBP 2400
Blood Pressure Cuff
22-32cm
ADULT
3) Wrap and tighten the cuff around the arm.
4) Leave free space with the size of 2 ngers between
the arm of the patient and the cuff. Excessive tightness
may cause venous congestion and discoloration of
the limb. If the cuff is wrapped too loosely, it cannot
be inated properly and the measured values may be
inaccurate. Remove all clothing covering or constricting
the measurement arm. Clothing may interfere with
measurement accuracy.
Reusable ProBP 2400
Blood Pressure Cuff
22-32cm
ADULT
Before using the device (cont.)
Loading ...
Loading ...
Loading ...