Loading ...
Loading ...
Loading ...
• 16 •
PERIODIC CLEANING
Proceed as follows for the parts installed on the carafe.
• Remove the carafe from the machine.
• Lift the cover and pay attention that the wand does not splash the remaining milk.
• Remove the pin:
- Rotate it counter-clockwise.
- Take o the pin from the cover.
• Wash the cover and the carafe with lukewarm water.
• Wash the wand and the pin of the machine by running lukewarm water inside the duct.
• After rinsing and drying all components, assemble the pin on the cover:
- Place the pin into the cover.
- Turn it clockwise until it is locked.
Insert the wand in the cover FROM THE STRAIGHT-CUT END and place the cover over the
milk container.
These parts can also be washed in the dishwasher placing them in the cutlery
basket so that they do not get lost.
Otherwise, the best way to clean the above-mentioned components is to leave
the dismounted parts for 30 min in a basinful of lukewarm water with the
speci c detergent Saeco Cleaning Powder. (Rinse the parts with running water
before reassembling them on the machine).
• Remove the wand from the cover.
Loading ...
Loading ...
Loading ...