Loading ...
Loading ...
Loading ...
• 8 •• 8 •
Orange
Orange
Orange
Orange
“INTENZA” WATER FILTER
To improve the quality of the used water,
it is advisable to install the water lter.
Remove the water lter from its packag-
ing, immerse it vertically (with the open-
ing positioned upwards) in cold water
and delicately press the sides so as to let
the air bubbles out.
Remove the small white filter from the
tank and store it in a dry place sheltered
from dust.
Set the Intenza Aroma System as speci ed
on the box.
A = Soft water
B = Hard water (standard)
C = Very hard water
Insert the lter into the empty tank. Press
it until its limit stop.
Fill the tank with fresh drinking water and
reinsert it into the machine.
Dispense the water in the tank by using
the hot water function (see section "Hot
water dispensing”).
Fill the water tank again.
Press the “
” button until the following
page is displayed.
Press the “
” button to select “ON” and
press the “
” button to con rm.
In this way, the machine has been pro-
grammed to inform the user of the need
to replace the lter.
Note: When an “Intenza” lter
must be replaced with a new
one, the function must be reset. Re-
place the lter as previously shown.
After that, enter the programming
menu until the indicated window
is displayed and select the “RESET”
option. Then press the “
” button.
This way, the machine is programmed
to manage a new lter.
Note: If the lter is already
installed and you want to
remove - but not replace - it, select
the “OFF” option and then press the
“
” button.
To exit, turn the selector switch clockwise
and set it to the “
” position.
Note: If there is no Intenza
water lter, insert the previ-
ously-removed small white lter into
the water tank.
Turn the selector switch counter-clock-
wise and set it to the “
” position.
Condition for rst use of the machine.
Loading ...
Loading ...
Loading ...