Loading ...
Loading ...
Loading ...
27
When making ice, set the ice making compartment's setting to .
Pages 21 - 22
Water Supply Pipe and Tank Holder
Once a month
Ice Tray
1 to 2 times a year
Open the door of the ice
making compartment
and unlock the ice tray
lock lever.
Pull the ice tray towards the
front and then remove it.
Empty the ice tray and wash it.
Attach the ice tray.
Push in the ice tray until it makes a clicking sound, and
then lock the ice tray lock lever.
Pull out the water supply
pipe and wipe the tank
holder with a clean cloth.
Disassemble and wash the parts.
Follow the procedure in
reverse to return the parts
to their original positions.
Check whether there are
any foreign objects between
the water supply pipe, tank
packing, and tank holder.
Tank Holder
Ice Tray Lock Lever
Water
Supply Pipe
There is a risk of the water
spilling. Pull out the tray slowly.
Do not use a sponge or scrubber. A damage may cause
malfunction.
After washing the tray, dry off any moisture.
Do not pour water into the tank
holder. Doing so may cause a
malfunction.
Twist and remove the water supply
pipe.
White minerals or chlorine
accumulation may adhere to the parts,
this is not abnormal. Wash off such
substances and reuse the parts.
Push in the water supply pipe firmly
so there are no gaps.
If there are gaps or looseness, it may
cause a malfunction.
Insert it horizontally so that
there are no gaps.
Failing to do so may cause noises to
occur, ice to not freeze, and may also
cause the water in the water tank or food
in the refrigerator compartment to freeze.
Water Supply
Pipe
Tank Holder
will appear on the operation panel.
If the alarm sounds continuously when the ice tray lock
lever is unlocked, lock the lever, close the door, wait for the
blinking
to turn off, and then try again.
will disappear. If the lamp does not disappear, check
the position of the ice tray lock lever and the up and down
orientation of the ice tray.
1
Easier to disassemble/assemble when wetted
3
Install the tank packing
Tank Pipe
Water Tank
1
Insert the tank pipe into the water
tank.
2
Connect the tank pipe to the
water supply pump.
Check that there are no foreign objects
between the tank pipe and the water
supply pump.
Tank Pipe
Water
Supply
Pump
Caution
Do not let
foreign objects
block the hole.
Install the tank pipe.
Unlocked
Tank Packing
Tank
Packing
Water Supply Pipe
Horizontally
So that foreign
objects do not
get inside
Before cleaning, make sure to set "Stop Ice
Making."
Pages 21 - 22
2
3
3
4
4
6
1
2
Locked
If the water supply pipe and tank packing are not installed, they may cause the water in the water tank or food in the refrigerator compartment and sliding cases to freeze.
Replacement is not usually required for the Chlorine-Cleaning filter. However, it may require replacement in the following cases.
・
When it clogs because something other than water was put in the tank
・
When it has broken
・
When mold has grown
To purchase a new filter, contact the retail store where you purchased the refrigerator.
* If mold forms easily in certain types of water, clean about 2 or 3 times a week.
Notice
Cleaning
Loading ...
Loading ...
Loading ...