Loading ...
Loading ...
Loading ...
- If the display shows an error code, check section 'Meaning of
the error codes' to see what the code on the display means and
what you can do. The machine cannot be used when this icon is
on the display.
Meaning of error codes
Error code Problem Cause Possible solution
1 The coee grinder is
blocked.
The coee exit duct is
clogged.
Clean the coee exit
duct thoroughly with
the handle of the
multifunctional tool or
a spoon handle.
3 - 4 There is a problem
with the brew group.
The brew group is dirty. Remove the brew
group and thoroughly.
. The brew group is not
positioned correctly.
Remove the brew
group and reinsert it.
Before you slide it back
into the machine, make
sure the two reference
signs on the side
match.
5 There is a water circuit
problem.
There is air in the water
circuit.
Remove and place
back the water tank a
couple of times. Make
sure you insert it into
the machine properly.
Check if the water tank
compartment is clean.
14 The machine is
overheated.
This can have several
causes.
Turn the machine o
and turn it back on
again after 30 minutes.
Try this 2 or 3 times.
If the above solutions do not help to remove the error code icon
from the display and bring the machine back to normal working
order, contact the Philips Saeco hotline. Contact details can be
found in the warranty booklet or on www.saeco.com/support.
10
xx
English
33
4219_460_3631_2_Lux_Booklet_A5_v2.indd 33 21/07/17 14:30
Loading ...
Loading ...
Loading ...