Loading ...
Loading ...
Loading ...
11
USING YOUR OVEN
CONTROL PANEL
When pressing any control pad function on the Electronic Oven
Control, use the pad of your finger to press the desired function.
Hold down the pad a few seconds, or until the desired function
appears in the display.
When entering multiple functions within one setting, pause
briefly between each control pad command. If a command
pad is pressed several times repeatedly, the pad may briefly
stop working. Wait a few seconds, and the pad should function
again as normal.
OVEN DISPLAY
■ When the oven is in use, this display shows the oven
temperature, heat source(s) and start time.
■ During Timed Cooking, this display also shows a timed
countdown and the stop time (if entered).
■ If “Err” appears on the display, an invalid pad was pressed.
Press OFF and retry your entry.
■ When the oven is not in use this display is blank, except
for the clock display.
FUNCTIONS
Control Panel
Using the Start Pad
The START pad begins any oven function except the Timer,
Control Lock and Sabbath Mode. If not pressed within 5
seconds after pressing a pad, “START?” will appear on the
oven display as a reminder. If not pressed within 5 minutes after
pressing a pad, the oven display will return to inactive mode
(blank) and the programmed function will be canceled.
If a function has been started and a different function is selected,
“START?” will appear in the display after 5 seconds. If the START
pad is not pressed within 5 seconds, the oven display will return
to the active/already started function.
Using the Off Pad
The OFF pad stops any oven function except for the Clock,
Timer, and Control Lock.
Using Control Lock
The Control Lock shuts down the control panel pads to avoid
unintended use of the oven(s).
The Control Lock feature may be used either when the range
is in use or turned off (for example, during cleaning).
The Control Lock is preset unlocked, but can be locked.
When the control is locked, only the TIMER SET/START,
TIMER OFF and OVEN LIGHT pads will function.
To Lock or Unlock Control:
Before locking, make sure the oven, the Timer and Timed
Cooking are off.
Press and hold START for 5 seconds until “CONTROL
LOCKED” appears on the display. Repeat to unlock and remove
“CONTROL LOCKED” from the display.
Clock
Setting the Clock
This is a 12-hour clock.
TIMER
Setting the Timer
The Timer can be set in minutes and seconds or hours and
minutes and counts down the set time. The time can be reset
during the countdown by repeating the steps below.
NOTE: The Timer does not start or stop the oven.
1.
Press CLOCK SET/START.
2.
Enter time of day.
3.
Press CLOCK SET/START.
1.
Press TIMER SET/START.
Press again to switch from
MIN/SEC and HR/MIN.
2.
Enter desired time.
3.
Press TIMER SET/START.
When time reaches 0:00,
4 chimes will sound until
TIMER OFF is pressed.
4.
Press TIMER OFF at any
time to cancel Timer or stop
reminder tones.
Loading ...
Loading ...
Loading ...