Loading ...
Loading ...
Loading ...
4
7
1
6
Control Panel and Features
SOIL LEVEL
Select the setting most suitable for your load. For heavily
soiled and sturdy fabrics, select Heavy Soil Level for more
wash time. For lightly soiled and delicate fabrics, select Light
Soil Level for less wash time. A lighter soil level setting will
help reduce tangling and wrinkling.
WASH TEMP
Wash Temp senses and maintains uniform water
temperatures by regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results, and following
the garment label instructions, use the warmest wash
water safe for your fabric.
■On some models and cycles, warm and hot water may be
cooler than your previous washer.
■Even in a cold and cool water wash, some warm water
may be added to the washer to maintain a minimum
temperature.
All rinses are cold.
WASH CYCLE KNOB
Use the wash cycle knob to select cycles on your washer.
See the “Cycle Guide” chart for detailed descriptions of
cycles.
RINSE OPTIONS
The following options may be added to most cycles. See the
“Cycle Guide” chart for additional details.
1 RINSE
This option is used to limit a cycle to a single rinse.
2 RINSES
This option can be used to automatically add a second
rinse to most cycles.
1 RINSE WITH SOFTENER
This option must be selected if using fabric softener
during a cycle. It ensures that fabric softener is added
at the correct time in the rinse for even distribution.
2 RINSES WITH SOFTENER
This option turns on both the Fabric Softener and the
2 Rinses option.
1
2
3
4
WATER LEVEL
Set the Water Level knob to the Auto Sensing setting and the
washer will ll to a level that ensures the load engages the
agitator. From this point, the electronic control will sense the
load and determine if additional water is needed.
Set the Water Level knob to the Deep Water Wash setting
and the washer will ll to the maximum water level.
NOTE: Expect longer cycles times due to extended ll times
when using the Deep Water Wash option.
START/PAUSE BUTTON
Press to start the selected cycle. Press again to pause the
cycle and unlock the lid.
NOTE: If the washer is spinning, it may take several minutes
to unlock the lid. Press and hold for 3 seconds to cancel
a cycle.
PROGRESS LIGHTS
The Progress lights show the progress of a cycle. At each
stage of the process, you may notice sounds or pauses that
are different from your previous washer.
SENSING
When the Start/Pause button is pressed and the Water
Level knob is set to Auto Sensing, the washer will ll and
begin sensing to determine load size and balance. Once
sensing is complete, the washer will ll to the appropriate
level for the detected load size and then begin the wash
phase of the cycle.
NOTE: Sensing and wash phases will be paused by
opening the unlocked lid. Close the lid to resume the
cycle. If the lid is left open for more than 10 minutes, the
washer will cancel the cycle and pump out the water.
The lid will lock after the wash phase to begin the initial
spinout and remain locked for the remainder of the cycle.
5
6
Not all features and options are available on all models.
Appearance may vary.
432 5
7
Loading ...
Loading ...
Loading ...