Loading ...
Loading ...
Loading ...
210
Maintenance
Replacing the Lamp
When the usage time of the lamp exceeds a certain amount of time, the following
message (two types) is displayed for 10 seconds every time the projector is turned
on.
When the time for lamp replacement is near
Prepare a new lamp when this screen is displayed.
• Only the [ ], [ ], OK, POWER, FOCUS, ZOOM and LENS SHIFT buttons are
available while this screen is displayed.
• When you press the POWER button, “Push POWER button again to turn off
power.” message appears.
• After this screen has been displayed for 10 seconds and disappeared, all buttons
become operable.
• This message will not be displayed again if you select [No] in response to the
message “Do you want to display this message again?”.
When the time for lamp replacement has passed
If a lamp replacement message is displayed, see “Lamp Replacement Procedure”
(P212).
• Only the POWER, OK, FOCUS, ZOOM and LENS SHIFT buttons are available
while this screen is displayed.
• When you press the POWER button, the “Push POWER button again to turn off
power.” message appears.
• When this screen has disappeared after being displayed for 10 seconds, all
buttons become operable.
• You can check the usage time of the lamp in [Lamp counter] in the [System
settings] menu (P171).
• This screen is not displayed when [Lamp warning display] is set to [Off] (P157).
Guidelines on lamp replacement timing
WUX7500 Approx. 3000 hours
WUX6700 Approx. 3000 hours
WUX5800 Approx. 3500 hours
Loading ...
Loading ...
Loading ...