Loading ...
Loading ...
Loading ...
161
Menu Description
Menu Guide Menu Description
HDBaseT signal quality
> [System settings] > [HDBaseT signal quality]
Display the video signal quality of HDBaseT input. The HDBaseT input signal value
received is indicated by a white line.
Extron XTP
> [System settings] > [Extron XTP]
Specify whether to connect to Extron XTP transmitters when connected via
HDBaseT.
Serial communication
> [System settings] > [Serial communication]
Select ports used for serial communication. Otherwise, you can refer to this setting
to check setting values for the port selected for serial communication.
High Indicated by the green portion. This is the recommended level.
Middle Indicated by the yellow portion. The signal is fluctuating. Check the cable.
Low
Indicated by the red portion. The signal cannot be used. Fix the cable connection
or replace the cable.
Do not coil or bundle cables.
Submenu Function
Off Do not connect to XTP devices.
On Connect to XTP devices.
Submenu Function
Service port Use the service port (CONTROL).
HDBaseT Use the HDBaseT port.
Detail
Option Function
Baud rate Modulation rate, in bits per second.
Data bits Number of bits of data.
Parity Number of parity bits.
Stop bit
Length of mark representing the end of data
bits. Select 1 or 2.
Loading ...
Loading ...
Loading ...