Loading ...
Loading ...
Loading ...
Maintaining your appliance _56
MAINTAINING YOUR APPLIANCE
3. Open the door fully. If the door will not open fully, the indentation is not inserted correctly in the
bottom edge of the slot.
4. Push the hinge locks up against the front frame of the oven cavity to the locked position.
Hinge lock
Unlocked position Locked position
5. Close the oven door.
REMOVING AND REPLACING THE WARMING DRAWER
Turn the power OFF before removing the warming drawer.
How to remove the warming drawer
1. Pull out the drawer until it stops
2. Locate the locking clips near the back of each full-extension roller guide rail. Using two hands,
push down on the left clip and lift up on the right clip to release the clips. Pull the drawer the
rest of the way out.
3. Clean the drawer in warm, soapy water. Rinse and dry thoroughly.
How to replace the warming drawer
1. Position the ends of the full-extension roller guide rails in the side rails in the drawer opening.
2. Push in the drawer to close it and snap the locking clips into place.
Right roller guide rail
Right drawer
locking clip
Left drawer locking
clip
NE597R0ABSR_AA_DG68-00431A-04_EN.indd 56 02/01/2014 13:08:41
Loading ...
Loading ...
Loading ...