Loading ...
Loading ...
Loading ...
Front Installation
(continued)
Installing Dial Plate and Front Frame
Some models require installation of the dial plate and the front panel of the air
conditioner included in a decorative kit. To assemble, follow these steps.
STEP 1: INSTALL DIAL PLATE AND BUTTONS OR KNOBS:
Some Models
\ /
Side Air Discharge
• Remove control knobs from front kit
(some models).
• Carefully remove protective film
from the front of the dial plate
(some models).
• Line up holes on dial plate with the
correct control stems and push dial
plate to control panel surface.
• While holding dial plate in place
install control knobs on protruding
stems.
STEP 2: INSTALL FRONT FRAME TO UNIT.
Decorative Front
• Position the top of the decorative front over the top flange of the case, and align the tabswith the
slots in the case.
• Asyou install the front frame to the unit be surethe vent handle ispositioned through the front in the proper
location.
• Carefully pull down on the front to engage the top tabs, while pushing the front over the case to
ensure proper alignment.
• The side tabs will "click" when front is seated.
• Install front retaining screw(s) at the bottom of the front (Fig. I), or behind the filter handle (Fig. 2).
FIG. 1
FIG.2
Loading ...
Loading ...
Loading ...