Loading ...
Loading ...
Loading ...
could be done by tying it to the tap with a piece of
string or attaching it to the wall.
In a sink drain pipe with a trap.
650-800 mm
The drain hose can be connected directly into the
pipe (e.g. beneath a washtub or sink), above the
water trap. The drain hose must be arranged so
that some part of it’s length is routed up to a level
corresponding to the top edge of the tub and fixed
in place there.
Directly into a drain pipe at a height of not less
than 65 cm and not more than 80 cm.
ø40 mm
650-800 mm
There must be an air gap around and below the
end of drain hose. This means that the internal
diameter of the standpipe must be larger than the
outer diameter of the hose.
The hose must not be sticked into the standpipe
more than 50 mm and it has to be fixed in this
position. The drain hose must not be kinked.
The drain hose can be extended up to total 3,5 m.
For the extension piece use a hose with an internal
diameter at least as large as that of the machine's
own hose. Use a suitable hose connector.
7
Loading ...
Loading ...
Loading ...