Loading ...
Loading ...
Loading ...
8h 4h
2h
Delay
Start
You must select this option after you have set the
programme and before you press button START/
PAUSE.
You can cancel or modify the delay time at any
moment, before you press button START/PAUSE.
Cancelling the delayed start after having pressed
button START/PAUSE:
1. Set the washing machine to PAUSE by
pressing button START/PAUSE.
2. Press the button Delay Start once, the light
relevant to the selected delay goes off.
3. Press button START/PAUSE again to start the
programme.
The selected delay can be changed
only after selecting the washing
programme again.
The door will be locked throughout the
delay time (door locked light lit).
The Delay Start can not be selected
with Drain or Spin programme.
SELECT THE DESIRED OPTIONS
Depending on the programme, different functions
can be combined. These must be selected after
choosing the desired programme and before
pressing the button START/PAUSE. The relevant
light will illuminate.
If an incorrect option is selected, the corresponding
indicator lamp flashes for about 2 seconds. For the
compatibility of the options with the washing
programmes, refer to the chapter 'Programme
Chart'.
STARTING THE PROGRAMME
To start the selected programme, press the button
START/PAUSE ; the corresponding pilot light
stops flashing and remains on.
On programme progress display the pilot lights C
and E illuminate to indicate that the appliance starts
operating and the door is locked.
ALTERING AN OPTION OR A RUNNING
PROGRAMME
It is possible to change any option before the
programme carries it out.
Before you make any change, you must pause the
washing machine by pressing the button START/
PAUSE.
The programme can be changed as long as the
button START/PAUSE has not been pressed.
Changing a running programme is possible only by
resetting it. Turn the programme selector dial to
and then to the new programme position. Start the
new programme by pressing the button START/
PAUSE again.
INTERRUPTING A PROGRAMME
Press the button START/PAUSE to interrupt a
programme which is running, the corresponding
light starts to flash. Press the button again to restart
the programme.
CANCELLING A PROGRAMME
Turn the selector dial to position to cancel a
programme which is running. Now you can select a
new programme.
OPENING THE DOOR AFTER THE
PROGRAMME HAS STARTED
First set the machine to pause by pressing the
button START/PAUSE.
After some minutes, the door can be opened, when
the following conditions are observed:
• The water temperature is below 55°C.
• The water level is below the bottom edge of the
door.
• The machine doesn’t spin.
If you cannot open the door but it is absolutely
necessary to open it you have to switch the
machine off by turning the selector dial to
. After
few minutes the door can be opened. (Pay
attention to the water level and
temperature!).
After this procedure, it will be necessary to set the
programme and the options again and then press
the button START/PAUSE.
AT THE END OF THE PROGRAMME
The machine stops automatically.
The pilot light D illuminates to indicate that the
programme has finished. The pilot light E goes out,
the door can be opened and the laundry can be
removed.
14
Loading ...
Loading ...
Loading ...