Loading ...
Loading ...
Loading ...
En
10
Basic style
Playback on this unit is performed mainly using tracks prepared with rekordbox installed on a computer.
! For instructions on operating rekordbox, see the rekordbox (Mac/Windows) user’s manual. The rekordbox (Mac/Windows) user’s manual can be
viewed from the [Help] menu of rekordbox (Mac/Windows).
! Also, for DJ players and DJ mixers, up to four PRO DJ LINK-compatible players can be connected with LAN cables (CAT5e) using PRO DJ LINK
connections.
! A switching hub (commercially available) may be necessary, depending on the combination of models used. Use a switching hub of 100 Mbps or
greater. Some switching hubs may not operate properly.
! A switching hub (commercially available) is necessary to connect to a mixer equipped with only one LAN port. For mixers with enough LAN ports for
all the DJ players and computers in the system, connect directly to the LAN ports on the mixer’s rear panel, without using a hub.
! Use a wireless router (commercially available) and access point (commercially available) conforming to either IEEE802.11n or IEEE802.11ac.
Depending on the signal conditions in the usage environment and the wireless router or access point, PRO DJ LINK connections may not operate
properly.
Connecting to a mixer with only one LAN port
When connecting to a mixer with only one LAN port using a switching hub, for optimum usage of rekordbox’s music file management functions, set
the channel number of the mixer to which the audio or digital audio cable is connected and the player number displayed at the bottom left of the lower
screen to the same number.
(Ex.: When the audio cable is connected to channel 1)
PLAYER 1 CH 1
Audio cable
A
B
10
9
8
7
6
5
4
3
2
1
0
10
9
8
7
6
5
4
3
2
1
0
10
9
8
7
6
5
4
3
2
1
0
10
9
8
7
6
5
4
3
2
1
0
10
9
8
7
6
5
4
3
2
1
0
10
9
8
7
6
5
4
3
2
1
0
9
6
3
0
To change the player number, follow the procedure below.
1 Disconnect the storage device (SD, USB) and LAN cable.
2 Press the [MENU/UTILITY] button for at least 1 second to display the [UTILITY] screen on the lower screen.
3 Turn the rotary selector to select [PLAYER No.], then press the rotary selector.
4 Turn the rotary selector to select the player number, then press the rotary selector to enter it.
5 Press the [MENU/UTILITY] button to complete the setting.
Loading ...
Loading ...
Loading ...