Loading ...
Loading ...
Loading ...
danger to life. Make sure that all occu-
pants are wearing safety belts correctly.
Warning
The efficacy of safety gear, including
safety belts, may not be fully functional or
fail in the following situations:
– The safety belts or safety belt buckles
are damaged, soiled, or changed in
any other way.
– Belt tensioners or belt retractors
were modified.
Safety belts can be imperceptibly damaged
in the event of an accident. There is a risk
of injuries or danger to life. Do not modify
safety belts, safety belt buckles, belt ten-
sioners, belt retractors or belt anchors and
keep them clean. Have the safety belts
checked after an accident at the dealer’s
service center or another qualified service
center or repair shop.
Correct use of safety belts
– Wear the safety belt twist-free and tight
to your body over your lap and should-
ers.
– Wear the safety belt deep on your hips
over your lap. The safety belt may not
press on your stomach.
– Do not rub the safety belt against sharp
edges, or guide it or jam it in across
hard or fragile objects.
– Avoid thick clothing.
– Re-tighten the safety belt frequently up-
ward around your upper body.
Buckling the safety belt
1. Guide the safety belt slowly over
shoulder and hip to put it on.
2. Insert the tongue plate into the safety
belt buckle. The safety belt buckle must
engage audibly.
Unbuckling the safety belt
1. Hold the safety belt firmly.
2. Press the red button in the belt buckle.
3. Guide the safety belt back into its roll-
up mechanism.
Middle safety belt in the rear
Buckling the safety belt
1. Pull the buckle tongues out of the
mounts in the roof.
2. Insert the lower buckle tongue in the
belt buckle, arrow 1.
3. Insert the upper buckle tongue in the
belt buckle, arrow 2.
Safety belt buckles must audibly click
into place.
Seite 89
Seats, mirrors, and steering wheel CONTROLS
89
Online Edition for Part no. 01405A02CA2 - II/20
Loading ...
Loading ...
Loading ...