Loading ...
Loading ...
Loading ...
Switching on/off and interrupting
cruise control
Switching on
Press the button on the steering
wheel.
Instrument cluster without enhanced
features:
Display in the instrument cluster
lights up.
Instrument cluster without enhanced
features:
Display in the instrument cluster
lights up. The current speed is adopted as
desired speed and displayed with symbol.
Cruise control is active and maintains the
set speed.
DSC Dynamic Stability Control is switched
on, if necessary.
Switching off
With the Stop&Go function for Steptronic
transmissions: when switching off while
stationary, depress the brake pedal simulta-
neously.
Press the button on the steering
wheel.
The displays go out. The stored desired
speed is deleted.
Interrupting manually
Press the button on the steering
wheel.
With the Stop&Go function for Steptronic
transmissions: when interrupting while sta-
tionary, depress the brake pedal simultane-
ously.
Interrupting automatically
The system is automatically interrupted in
the following situations:
– When the driver applies the brakes.
– Manual transmission: when the clutch
pedal is depressed for a few seconds or
released while a gear is not engaged.
– If selector lever position N is set.
– Dynamic Traction Control DTC is acti-
vated or DSC Dynamic Stability Control
is deactivated.
– If DSC Dynamic Stability Control inter-
venes.
– If the detection range of the camera is
impaired, for instance by soiling, heavy
precipitation or glare effects from the
sun.
– Manual transmission: if the vehicle in
front decelerates below a speed of ap-
prox. 20 mph/30 km/h.
– With the Stop&Go function for Step-
tronic transmissions: following a sta-
tionary period of approx. 3 seconds, af-
ter the vehicle was braked to a stop by
the system.
Setting the speed
Maintaining/storing the speed
Press or button in the interrupted
state.
When the system is switched on, the cur-
rent speed is maintained and stored as the
desired speed.
Instrument cluster without enhanced
features:
The stored speed is displayed by the
symbol in the Info Display of the instrument
cluster.
DSC Dynamic Stability Control is switched
on, if necessary.
Seite 182
CONTROLS Driving comfort
182
Online Edition for Part no. 01405A02CA2 - II/20
Loading ...
Loading ...
Loading ...