Loading ...
Loading ...
Loading ...
Interruption of the closing procedure
The closing procedure is interrupted in the
following situations:
– If the vehicle starts off with a jerky
movement.
– By pressing the button on the outside of
the tailgate. Pressing again closes the
tailgate.
– By pressing the button on the inside of
the tailgate. Pressing again closes the
tailgate.
– By releasing the button in the storage
compartment of the driver's door. Press-
ing again and holding continues the
closing motion.
Malfunction
Safety information
Warning
With manual operation of a blocked tail-
gate, it can release itself unexpectedly
from the blockage. There is a risk of injury
or risk of damage to property. Do not oper-
ate the tailgate manually if it is blocked.
Have it checked by a dealer’s service cen-
ter or another qualified service center or
repair shop.
Manual operation
Operate the unlocked tailgate manually with
a slow and smooth motion.
To close the tailgate fully, press down
lightly only. Closing occurs automatically.
Driver profiles
Concept
In the driver profiles, individual settings for
several drivers can be stored and called up
again when required.
General information
There are three driver profiles with which
personal vehicle settings can be stored. Ev-
ery vehicle key has been assigned one of
these driver profiles.
If the vehicle is unlocked using the vehicle
key, the assigned personal driver profile will
be activated. All settings stored in the
driver profile are automatically applied.
If several drivers use their own vehicle
keys, the vehicle will apply the personal set-
tings as it is being unlocked. These settings
are also restored, if the vehicle has been
used in the meantime by a person with a
different vehicle key.
Changes to the settings are automatically
stored in the driver profile currently acti-
vated.
If another driver profile is selected via the
Central Information Display (CID), the set-
tings stored in it will be applied automati-
cally. The new driver profile is assigned to
the vehicle key that is currently in use.
There is an additional guest profile available
that is not assigned to any vehicle key: it
can be used to apply settings in the vehicle
without changing the personal driver pro-
files.
Functional requirements
For the system to be able to identify the
driver profile associated to a particular
driver, the detected vehicle key must be
clearly allocated to the driver.
This is the case when:
Seite 73
Opening and closing CONTROLS
73
Online Edition for Part no. 01405A02CA2 - II/20
Loading ...
Loading ...
Loading ...